All articles

Hoist

Article Details

Despite the laughable incompetence of TNT Australasia who managed to "lose" a 2m long item weighing 400kg for 2 weeks, my MaxJax hoist finally arrived today.

I decided that crawling around under cars was undignified for a man of my age and so here is the solution.

I have arranged a variety of helpers to install it on the weekend.  Watch this space and the emergency departments of local hospitals.

 

Read more

It's Christmas!

Article Details

I had become a bit bored and despondent, as work has stopped pending the arrival of the parts necessary to continue.

I wasn't expecting anything for another week but this morning my order from SNG Barratt arrived.  Everything is there apart from the bits still on back order.

Then 2 hours later, the first of my wheels arrived too.  Off to get them now.

 

The wheels look terrific.  So excited was I that I rang through to SC Spares where I got them and ordered a whole lot of other stuff.

 

 

Read more

New wheels

Article Details

Bit the bullet and ordered 5 new wheels today.  The old ones are really too rusty to ever look good again.

I have bought 15 x 6.5" curly hub wheels which the man says will fit my car.  Hope they do..

Read more

Masterly inactivity

Article Details

I really want to pull the IRS off but I need my hoist to arrive and it STILL hasn't been delivered yet.

If the damn thing's not here by the weekend I can see myself trying to  remove it without the hoist which is far more likely to end in tears.  Problem is I have visitors coming on Saturday afternoon and after a few beers the job might start to look easier...

Read more

Wax on wax off

Article Details

Unable to do anything constructive at the moment as I'm waiting for parts from the UK and the brakes to be ready, so I decided to wash and wax the car.

I haven't had to do this to a car for 25 years and it's hard work!

Q:  Can you walk into a shop and buy an E Type fanbelt in Austalia?

A:  Of course not, silly.

Read more

First bit of reassembly

Article Details

Well nothing major, but I have put the horns back on resplendent in their new gloss black paint; and they still work!

I got the radiator back from Mick the radiator bloke today.  Radiator is in good condition having had the top and bottom taken off, cores cleaned out and then reassembly and leak tested.  Mick's opinion is that it's original and in good condition.  Once I get my new RHD steering rack and install it the radiator can go back in.

I am bemused by the 2 little diecast taps, one on the block and the other on the radiator.  They are too small to act as a serious drain point for the cooling system. All I can see them doing is leaking at an inopportune time and making the car overheat, so I turned up two brass blanking plugs, removed the silly taps and replaced them.

I ordered all of the parts for the RHD conversion, plus a new Lockheed master cylinder and some other bits last night, from Barratts.  I sent an email for a quote to both them and XKs Unlimited in the US, but only got a reply from Barratts, so they got the business.

Hopefully parts will start to arrive within a couple of weeks and the real work can begin.

Read more

Gloss black enamel hides a multitude of sins

Article Details

I managed to spend about an hour removing and cleaning the radiator supports and the horns.

Evenrthing has had a good clean up and tomorrow I'll spray them in the car restorer's version of the Philosopher's stone; Kill Rust Black Enamel paint.

Turns s*&t into gold.  Or to quote my good friend Jarrod, who works in a car yard "Used Car Salesman's motto:  Paint It Black and Put It Back".

All things being equal I might actually do my first bit of reassembly tomorrow!

Read more

JA: Jagaholics Anonymous

Article Details

Phone call:

Andrew: "Rob, I was tempted today.  Really tempted."

Rob: "Yes?"

Andrew: "Well, I couldn't help myself."

Rob: "  It happens sometimes.  What did you do?"

Andrew:  "I bought a Max Jax hoist".

Rob: silence... then "Oh Andrew that's terrible! Don't you have any self control at all?"

Andrew:  (miserable silence)

Rob: "So when do you get it and can I come over and have a look?"

 

Read more

Cooling system v1.0001

Article Details

I managed to finish work early today, and despite it being the middle of winter the sunshine beckoned.

So I rolled the old girl out onto the back lawn and took out the radiator and the water pump.

Lots of fun was had with hoses and my new high pressure water squirty thing, flushing the block out as best I could and cleaning the previously inaccessible front of the engine.

I took the radiator to a local radiator place to get it cleaned out.  Fantastic.  Lots of solder and open gas flames.

Then the brakes were dropped off to Tony.  He did the "double teapot with head shake" (hands on hips) at the  condition of the MC and booster with the classic "Hmmm that's going to be expensive" head shake.  Apparently the boosters are a "frontbottom" and hard to get apart.  We'll see.

Got an email from a man about a set of SUs.

Read more

Cooling System v1.0000

Article Details

Not much time to play today, but managed to drain the cooling system with a view to taking the radiator off for a checkup.

After comparing the radiator with pictures in the Barratt catalogue I suddenly got worried; it doesn't look right.  Finally however the XKs Unlimited catalogue saves me.

Bought a high pressure water blaster and cleaned off the front of the engine, previously concealed by the bonnet.

I'm still in two minds about whether I do the RHS conversion before or after getting the car registered.
I calculated the cost of parts for the conversion today; around $2k plus freight etc.
My cracked windscreen probably won't pass registration, so it needs replacement. As it really needs to come out for rewiring access, it may be that I'll bite the bullet and do the conversion first.  This would also mean that I will have a new wiring loom which should sort out any other electrical gremlins.

Watch this space.

Read more