2013

Thursday, 04 July 2013

More paint photos

As Ross paints something, he takes photos and sends them to me. Here's this week's lot.

 

3.8 boot painted

 

3.8 inside painted

 

 

 

3.8 firewall painted

 

3.8 framesl painted

 

 

Read more

Wednesday, 03 July 2013

Engine machining

The engine has been down at the machine shop for a while. Here's a shot of the head, just waiting for new cam buckets to be fitted. Brendan needs the cam buckets to do the job, as they are individually fitted.

 

3.8 head work

 

So 4 weeks ago, I ordered a set of 12 oversized long skirt cam buckets from XK's in the US.

Mystifyingly, when they arrived, there were only 10.

I emailled them and they said yes, we will send you another 2 immediately, at our expense.

It seems that in order to keep their expense down they sent them by the little known USPS Rickshaw/Carrier Pigeon combo. This fascinating service took 12 days.

Needless to say, when the 2 cam followers arrived, they were the wrong ones. See the miniskirt?

 

3.8 tappets

 

 

So another pair of the right cam followers was sent UPS, and actually arrived and were the right ones. I'm glad that the XKs Despatch Dept guy was so kind as to thank me for my patience.

 

Read more

Sunday, 23 June 2013

Fettling

Let the pics speak for themselves.

Here, I have shrinkwrapped the ScreenJet bracket.

 

3.8 screenjet bracket

 

Here I have reassembled the headlight sockets.

 

3.8 headlight surrounds

 

Here the steering column is being rebuilt.

 

3.8 steeri ng column

 

Here I have turned up a pair of Delrin bushes for the uper steering column.

 

3.8 steeri ng column bushes

Read more

Saturday, 22 June 2013

Windscreen wipers

Cold and rainy today. A good day for small jobs. So I stripped the windscreen wiper motor. Inside it looks pretty good with almost no wear on the brushes. I suspect it has seen very little use.

 

3.8 wiper motor inside

 

An hour with a wire wheel on the grinder, a bit of paint and 10 minutes soldering in the new wires in the correct polarity for parking on the RHS. just like a new one!

 

3.8 wiper motor

Read more

Saturday, 15 June 2013

Kelsey Hayes

I finally built up enough courage to tackle the Kelsey Hayes brake booster today.

It stripped down very easily and was in good condition apart from some scoring on the central shaft. Fortunately this was easily fixed with some gentle linishing in the lathe.

The rest of the assembly was easy given that I'm used to servicing scuba equipment.

For good measure I painted the brake and clutch cylinders with caliper paint as well.

 

3.8 booster

 

3.8 brake cylinders

Read more

Friday, 14 June 2013

First lot of top coat

Ross sent me a couple of pictures today. The first lot of top coat on the underside of the tub.

 

3.8 first paint

 

 

3.8 first paint1

 

Read more

Sunday, 09 June 2013

Sunday run to Goolwa


We go for regular E Type runs on a Sunday morning, weather permitting. Today we ended up at Goolwa.

 

3.8 Goolwa run 06 2013

 

On the way back we dropped in to see Ross. Bonnet is reassembled and about to be pulled apart prior to painting.  My body shell is in primer and being blocked back prior to putting some colour on the underside.

 

3.8 body in primer

 

3.8 body in primer2

 

3.8 bonnet

 

3.8 bonnet louvres 

 

3.8 bonnet light

Read more

Saturday, 18 May 2013

Coopercraft

One of the front hubs on my coupe has worn splines which make an annoying clunk on braking or acceleration. So I bought a new set of hubs a while back. I had also bought myself some upgraded front calipers from CooperCraft in the UK. I haven't got around to fitting either as it's a fiddle. Essentially you need to pull down the whole axle unit and rebuild it to replace the hubs.

Then, with all of the front suspension bits from the roadster sitting in the shed it occurred to me that as they are identical I could reassemble the whole axle unit and do a straight swap. I did the assembly today and they look lovely with the new discs, shiny zinc and Greenstuff pads.

All I need is a new set of bottom ball joints and I can drop the old ones off and bolt the new ones straight on. That's about an hour's work depending on how troublesome the ball joints are. The originals will go onto the roadster. I'll still have to strip them and reassemble them with new hubs but at least I can drive the coupe in the interim.

 

Coopercraft brakes

Read more

Sunday, 12 May 2013

Coupe update

I've been sorting out a few irritating problems with the coupe.
First and formost has been poor tune, with a miss under load. This has been going on since the engine rebuild and I finally admitted defeat and took the car back to see John Hurley. The problem turned out to be that the piston in the middle carby was sticking because the jet wasn't centred. John sorted this out and tuned the car and it runs perfectly. I drove the coupe out to see Ross when I went there. It is now a joy to drive. I have also replaced the exhaust cam cover gasket and now no oil leak!

4.2 engine

I fitted the 5" chrome wires that came with the 3.8 roadster to see whether the car handles differerently on them. Both sets of wheels are fitted with 205 70 tyres and to be honest there's really not much difference between them. The wheels have cleaned up a treat and have brand new Pirellis fitted.
In doing this though I noticed a loud knock had appeared in the front left suspension. On checking I found the sway bar link arm had pulled away from its bush; the washer I had used was too small. Easy mistake, but easy fix and no damage done.

3.8 wheels on 4.2

 

Sway bar link loose

Other things I've fixed are some rattles from the bash plates under the engine frames, and I have finally found the source of the petrol smell from the tank. Turns out the flexible filler pipe hose was too big and leaked. Replaced with some difficulty, it cured the petrol miasma. I still have too much exhaust smell in the cabin but that's a job for another day.

Read more

Apologies and an update

Apologies to my readers; there has been a bit of a hiatus over the last few months because while I am waiting until the roadster body is ready there's little I can do.

Current state of play:

Bonnet. I drove out to see Ross two days ago. There are 14 individual panels that make up the bonnet, held together by about 100 1/4" bolts and a lot of setscrews. It's been disassembled, paint stripped and grit blasted and all of the dents have been knocked out. The underside of the nose was pretty crumpled. otherwise the panels are pretty straight and rust free. Ross reckons he'll have the guards done this week and will then reassemble it with the newly replated bolts and screws.

3.8 bonnet top metal

 

 

 

3.8 bonnet etched


Body. All of the metal work on the tub is complete, and Ross has filled it with fish oil and painted the underside with stoneguard. It is painted in primer and ready for blocking back once the bonnet is reassembled. The doors have new skins and are fitted up to the body shell.

Engine. I pulled the engine down 2 weeks ago. It looked to have been recently rebuilt; bores look good, +20 pistons that looked pretty new and pristine looking -10 crank journals. The head though does look to have some internal corrosion and the flywheel is quite scored and will need a serious face.

After a bit of thought I have put aside the temptation of just putting it back together and I'm sending the block off to be resleeved to standard bore with top hat liners. I'll get everything including the head checked and measured, and hopefully will be able to leave the crank as it it with just new bearing shells. I'll still get the block chemically cleaned, get the mains line bored if necessary and rebush the rods. Then balance everything and reassemble with new timing gear and a full head rebuild. Chris reckons he'll have the engine done by the time the body is ready to bring home to my place.

Other ancillaries: IRS complete. Suspension complete. Carbs complete. Cooling system complete. Brakes largely complete; trial assembly of the Kelsey Hayes looks encouraging. Heater box complete. Gearbox done and dusted. Wheels: cleaned, pumped up and trialled on my coupe, seem pretty much brand new.

 

3.8 Brake pedal box dry run

 

Next big PITA job is getting all the chrome redone. Ross has still got the bonnet chromework to make sure it all fits, but I should be able to get that back soon. After my experiences with the last chromers I'm going to try someone different. Hopefull they'll be better.

Roll on End of July!

Read more

Updates Calendar

<< < March 2013 > >>
Mon Tue Wed Thu Fri Sat Sun
        1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31